Cyto-Mine

Cyto-Mine

The challenge in biopharma is to screen large cell populations for antigen-specificity, productivity or other parameters, and then isolate rare cells with confidence of clonality. Cyto-Mine® has been developed to shrink the whole cell screening and cloning process into a single system to accelerate and simplify your workflow.

Key Benefits:

  • High throughput cell screening
  • Dramatic cost and time reduction
  • Every cell assayed for secreted target protein specificity and/or productivity
  • Collects the high value positives
  • Generates images as proof of monoclonality
  • Gentle and sterile process
  • Animal Origin Free reagents

LS 13 320 XR - Laser Diffraction

LS 13 320 XR - Laser Diffraction

For big improvements that help you spot small differences.

The LS 13 320 XR offers best-in-class particle size distribution data from advanced PIDS technology,* which enables high-resolution measurements and an expanded dynamic range. Like the LS 13 320, the XR analyzer provides fast, accurate results, and helps you streamline workflows to optimize efficiency. Some big improvements help you reliably spot small differences that can have a huge impact on your particle analysis data.

  • Direct measurement range from 10 nm – 3,000 µm
  • Automatically highlights pass/fail results for faster quality control
  • Enhanced software that simplifies method creation for standardized measurements

Real time PCR kit

Real time PCR kit

Altona Diagnostics develops and produces a RealStar® Real time kits for pathogen diagnostic. The number of kits growths every month, please see the current productlist below.
  • Human Herpes Viruses and Polyomaviruses
  • Respiratory Viruses, Enteric Viruses and Bacteria
  • Blood Borne Viruses and tropical viruses

Productlist RealStar® kits


Vapour Pressure Analyser

Vapour Pressure Analyser

The Vapour Pressure Analyzer or VPA measures the vapor pressures of solids, liquids and oils using the Knudsen effusion method.

The vapour pressure is an important material physical property that defines the amount of vapor phase material that exists in equilibrium with the original material. All materials enter the vapour phase by sublimation (solid – gas) or evaporation (liquid – gas).

The vapor pressure of a material at thermodynamic equilibrium is a fundamental property of the material and is only a function of temperature.

  • Experimental temperature  20°C - 85°C, sample mass up to 1 g
  • Sample pre-heater up to 400°C
  • Rotary pump Vacuum pressure 1 x10-3Torr.
  • Turbomolecular pump in combination with rotary pump 10-7Torr.

DVS Resolution

DVS Resolution

Dual Vapor Gravimetric Sorption Analyzer

DVS Resolution's key feature is the combined ability to precisely control and measure temperature and relative humidity while recording the highest resolution changes in mass. DVS Resolution uses a dry carrier gas typically nitrogen or compressed air for its operation. Digital mass flow controllers regulate flows of dry and saturated gases. 

Relative humidity is generated by precisely mixing dry and saturated gas flows in desired flow ratios which produce expected relative humidity. In a typical experiment a known concentration of water vapor is delivered over a sample placed inside the sample pan connected to the Surface Measurement Systems Ultrabalance™ measuring realtime mass changes caused by sorption or desorption of water molecules. Prior to sorption measurements, the sample can be in-situ preheated/dried at temperatures of up to 300oC. 

Additionally, the sample chamber and water vapor generation are at thermal equilibrium in a single temperature enclosure allowing for operation over the entire temperature range (5-85 oC) without risk of condensation.


DVS Endeavour

DVS Endeavour

A key feature of DVS Endeavour is the ability to precisely control and measure temperature and relative humidity while simultaneously recording the highest resolution changes in mass on up to 5 samples. Additionally Organic vapor partial pressures can now be directly measured using Surface Measurement Systems' Ultrasonic sensor (patent pending). In a typical experiment a known concentration of water vapor or organic vapor is delivered over a sample placed inside the sample pan. The sample pan is connected to the Surface Measurement Systems Ultrabalance™ measuring real-time mass changes caused by sorption or desorption of water and/or organic molecules.

  • Simultaneous 5X sample measurement
  • Organic and Water vapor sorption kinetics
  • Organic vapor sorption in a fixed RH background
  • Real time partial pressure measurement and control
  • Water vapor sorption isotherms from 5 to 85 oC
  • Organic vapor sorption isotherms from 5 to 50 oC
  • In-situ drying of samples to 300oC
  • Optional Color Video Microscopy/Fiber Optic Probe Spectroscopy
  • True0™ drying at 0.0% RH

 


DVS Adventure

DVS Adventure

The DVS Adventure is a water vapor sorption analyzer that measures sorption and desorption isotherms over a broad range of humidities and temperatures. It offers unprecedented temperature stability and humidity performance. It provides valuable information about the interactions of a sample with water vapor that is critical for the development of new materials and processes. For example, in many industries water sorption properties of raw materials are considered as key parameters in determining their storage, stability, processing and application performance.

  • Humidity Stability over 24 hours
  • True0™ RH
  • State-of-the-Art Temperature Performance
  • Balance Baseline Stability over 24 hours

Inorganic Elemental Analysis

Inorganic Elemental Analysis

The elemental composition of a material determines its properties. Elemental analysis is therefore essential for the characterization and quality control of materials that need to meet certain requirements.

Elementar's user-friendly inductar series using the high-temperature combustion method to determine elemental concentrations of carbon, sulfur, oxygen, nitrogen, and hydrogen is the ideal solution for R&D, routine, and high-throughput laboratories.

Portfolio:

  • inductar CS cube
  • inductar ONH cube
  • inductar EL cube

N/Protein Analysis

N/Protein Analysis

The determination of the total protein content is an essential tool for quality control and protein declaration according to international labeling laws in the food & feed industry and research facilities. Since the protein content can directly correspond to product properties, highly precise, matrix-independent protein analyses are required in all application areas.

Our N/protein analyzers use the high-temperature combustion method according to Dumas, which has clear advantages over Kjeldahl regarding laboratory safety, sample throughput, labor time, amount of chemical waste and thus cost-per-analysis.

Portfolio:

 

  • rapid N exceed
  • rapid MAX N exceed

TOC & Water Analysis

TOC & Water Analysis

The content of total organic carbon (TOC) in liquid and solid samples is one of the most important screening parameter in water and environmental analysis. Whether you look at the evaluation of water quality or at the recycling of residues – there is no way around TOC.

Our products for TOC and water analysis offer fast and easy determination of total organic carbon in water and solids. The robust design guarantees highest possible uptime for routine operation.

Portfolio:

  • acquray
  • vario TOC cube
  • vario TOC select
  • soli TOC cube

Stable Isotope Analysis

Stable Isotope Analysis

Stable isotope ratio mass spectrometry (IRMS) is a useful technique with a broad range of applications. This relatively simple, yet amazingly powerful technology brings ever deeper understanding to areas from paleoclimate studies to police forensics, archaeology to aquatic ecosystems, sports doping to soil science and many stops in-between. With such diverse applications areas, we support a complete portfolio of equipment to support you with your research, no matter which application you are focused on. 

 

Portfolio:

  • isoprime visION Solutions
  • isoprime precisION
  • IRMS Software
  • EA Inlets
  • Chromatography Inlets
  • Headspace Analysis
  • Dual Inlet Analysis

 


Organic Elemental Analysis

Organic Elemental Analysis

Carbon, hydrogen, nitrogen, oxygen and sulfur are the basic elements of living nature. Their quantitative determination in the most versatile combinations of substances is the origin and essence of the Elementar product portfolio. 

Portfolio includes:

•    vario MICRO cube
•    vario EL cube
•    vario MACRO cube
•    vario MAX cube
•    rapid CS cube
•    rapid MICRO N cube
•    rapid OXY cube
•    trace SN cube

 


Vi-CELL MetaFLEX

Vi-CELL MetaFLEX

Designed for micro to large-scale cell culture applications, the biochemistry analyzer delivers fast, accurate bioanalytical analysis (measuring pH, pO2, pCO2, glucose, lactate, electrolytes and more parameters). The compact and reliable Vi-CELL MetaFLEX is designed to be operational more than 22 hours a day, with a turnaround time of less than 60 seconds.  The instrument is able to store up to 2,000 results on-board.  Testing is quick and intuitive. The only consumables required are the sensor cassette and solution pack.
  • delivers fast, accurate bioanalytical analysis
  • Vi-CELL MetaFLEX is designed to be operational more than 22 hours a day
  • turnaround time of less than 60 seconds. 

Vi-CELL, Automated Cell Viability

Vi-CELL, Automated Cell Viability

The Vi-CELL provides cell concentration and viability using the Trypan Blue dye exclusion method combined with video imaging of a flow-through cell.Key Features:
  • Results: ViCell measurements provides % Viability, Total Cell Concentration and Mean Cell Size.
  • Reliability: This automated process eliminates variability inherent in manual sample preparation and counting.
  • Safety: Uses validated reagents in a "closed" system.

Multisizer, Coulter Counter

Multisizer, Coulter Counter

The Multisizer 4e COULTER COUNTER provides size distributions in number, volume and surface area in one measurement.
  • Dynamic Size Measurements: the instrument can measure changes in size as a function of time.
  • Reliability: The MultiSizer uses the Golden Standard "Coulter Principle" for measuring cell size and concentration.
  • Flexibility: Overall sizing range from 0.2 µm to 1600 µm.

PA 800 plus

PA 800 plus

The PA 800 plus Pharmaceutical Analysis System* was designed in collaboration with biopharmaceutical development and QC groups. During the design of the PA 800 plus, Beckman Coulter emphasized assay portability, enhancing the overall system utility in multi-user, multi-instrument facilities.
  • PA 800 Plus provides analysts with robust and easy-to-use characterization
  • Integrating quantitative and qualitative analysis
  • Automated solutions for protein purity, charge isoform distribution & glycan analysis

DelsaMax Zetapotential

DelsaMax Zetapotential

DelsaNano use photon correlation spectroscopy (PCS), which determines particle size by measuring the rate of fluctuations in laser light intensity scattered by particles.
  • Sensitivity: Size and zeta potential measurement for particles from 6 Angstrom to 7 micron in suspension with concentration ranging from 1 ppm to 40%
  • Flexibility: Uses conventional static and automatic titration measurements of suspended particles and can measure zeta potential of a flat sample or surface.
  • User friendly: Easy to follow standard operation methods.

6875 Large FreezerMill, single chamber

6875 Large FreezerMill, single chamber

The Large FreezerMill accommodates samples up to 100g. The grinding chamber takes one large vial, or 4 standard vials (with an adaptor) or multiple microvial sets. There is room for additional vials to be precooled while the active sample is being processed. This helps increase sample throughput.
  • Direct immersion in Liquid nitrogen for best in class performance
  • Intuitive touchscreen for easy programming & operation
  • Simple & easy recall of up to 20 methods 
  • Safety interlock for operator safety
  • Magnetically driven impactor is only moving part – no mechanical parts to maintain
  • Optional Autofill system is available, to reduce exposure to LN
 
 

GenoGrinder 2010

GenoGrinder 2010

This high throughput plant & animal tissue homogeniser with adjustable clamp accommodates up to 6 x multi-well plates or 16 x 50ml centrifuge tubes. 
  • Safety interlock & pneumatic cylinder stabilise the lid 
  • LCD screen displays speed and timer settings during grinding
  • Clamp with quick release button for rapid & easy loading of samples in any suitable format
  • Easy to use rate from 500-1750 RPM, & timer controls for up to 20 minutes 
  • Viewing window allows you to see grinding process as it happens
  • Full range of cryogenic vials & cooling blocks for use with temperature sensitive samples

X-600 - 6 position Electric Fluxer

X-600 - 6 position Electric Fluxer

The next generation in electric fusion offering enhanced features for unparalleled results. Up to 6 samples can be processed simultaneously in a single furnace, giving a throughput of up to 30 samples per hour. The X-600 can be used to prepare glass beads for XRF analysis. An optional stirring module provides for preparing samples for acid digestion & wet chemistry applications. Minimal training is required as the sleek, colour touchscreen interface with icons and menus makes operation easy & efficient.
  • High performance furnace with robust heating elements that are impervious to flux
  • No exposed metal in the furnace so eliminates contamination
  • Dynamic temperature profiling to maintain uniform temperature across the furnace
  • Individual power compensation allowing uninterrupted operation even if an element fails
  • Auto-locking safety shield to ensure operator safety

X-300 - Multi-position Electric Fluxer

X-300 - Multi-position Electric Fluxer

The next generation in electric fusion offering enhanced features for unparalleled results. 
 Up to 3 samples can be processed simultaneously in a single furnace, giving a throughput of up to 15 samples per hour. 
 Easy to install by plugging the unit into a single phase socket. The X-300 can be used to prepare glass beads for XRF analysis. Minimal training is required as the sleek, colour touchscreen interface with icons and menus makes operation easy & efficient.
  • High performance furnace with robust heating elements that are impervious to flux
  • No exposed metal in the furnace so eliminates contamination
  • Dynamic temperature profiling to maintain uniform temperature across the furnace
  •  Individual power compensation allowing uninterrupted operation even if an element fails
  • Auto-locking safety shield to ensure operator safety

CESI 8000

CESI 8000

Introducing the CESI 8000 High Performance Separation - ESI Module

Mass spectrometry (MS) has become an indispensible technology for the analysis of compounds of biological interest. Our improvements in assay sensitivity and reduction in ion suppression reveal new information that is critical to your research, whether you're characterizing a therapeutic protein, identifying the proteins that make up a specific proteome, analyzing post-transitional modifications, or studying a metabolomic fingerprint.

We developed a new front-end separation and ionization technology called CESI, which combines the high efficiency and ultra-low flow of capillary electrophoresis (CE) with an integrated electrospray ionization source. This optimization of electrospray ionization (ESI) into the nanoflow region has shown to greatly improve assay sensitivity and reduce ion suppression.

Advantages of CESI-MS:

  • Ultra-low flow separation-ESI
  • Minimize ion suppression
  • Maximize ionization efficiency
  • Increase sensitivity
  • Non-tapered, open-tube capillary, with no dead volumes

Genetic Analysis System

Genetic Analysis System

GeXP - All applications on a single instrument with only one array and one gel

The GenomeLab GeXP supports the broadest spectrum of DNA applications on a CE instrument, including DNA sequencing and fragment analysis. As the only instrument in the market it offers the flexibility for multiplex Gene Expression Analysis studies. It provides you data from more than 30 genes in a single reaction and collects 5800 data points per day for a further analysis.

  • Sequencing: Plasmid; PCR product, re-sequencing, confirmatory sequencing, mutation/heterozygote detection, microbial ID by 16s sequencing and more
  • Fragment Analysis: STR, MLPA, Ribotyping, SSR, AFLP, T-RFLP, MLVA, SNP, LOH, mutiplex Pathogen or Virus detection and more
  • Gene expression profiling: get expression data for more than 30 genes from a single reaction starting with only a few ng of total RNA

Cyclic Corrosion Tests (CCT)

Cyclic Corrosion Tests (CCT)

The CCT type of test chambers comes with both front loading and top loading is developed to conduct automated, cyclic corrosion tests pursuant to the major corporate test standards developed by the international automotive industry. Standards like: DIN EN ISO 11997-1:2006 CYCLE B (VDA 621-415), VW PV 1210 (climate module required) and GMW 14872.  

These test chambers can also perform standard Salt Spray test according to ISO 9227 and Water Condensation tests (CH, AT AHT) according to ISO 6270-2.

  • Operates from ambient up to +60°C  
  • Advanced steel design allows fast temperature and humidity transient times
  • The patented VLM technology for best possible reproducibility

Salt spray chambers

Salt spray chambers

Compact and easy to operate test chambers are designed for conducting salt spray tests (NSS, ESS and CASS) pursuant to the most common international corrosion tests DIN EN ISO 9227,  DIN 50942, DIN 53167 and ASTM B 117-73, ASTM B 287-74 and many others.

Fast heat transfer allows fast temperature increase and accurate temperature control; this is possible due to the flat heaters underneath the bottom and behind the rear wall of the test chamber.

  • Electronically controlled membrane pumps for stable and accurate dosing of test solution.
  • Freely moving tanks for preparation and containment of test solution for Salt Spray test
  • High precision spraying nozzle with mix of test solution and compressed air made of PEEK

Kesternich (SO2) chambers

Kesternich (SO2) chambers

Virtually any VLM front loading test chamber designed to perform water condensation tests (CON) can be equipped with one of above gas dosing systems for performing Kesternich test in the SO2 environment.  User friendly and safe operation.

VLM offers three types of systems performing Kesternich test and all Cabinets comply with these standards:  DIN EN ISO 6988, DIN 50018 and ASTM G 85

  • - Manual gas dosing system (KES) with paraffin oil
  • - Electronic gas dosing system (EKES)
  • - Automatic gas dosing system (AKES)

Condensation chambers

Condensation chambers

Compact and easy to operate test chambers from VLM that are designed for conducting Constant Humidity (CH) and alternating temperature/humidity corrosion tests (AT, AHT) pursuant to the most common international corrosion test standards DIN EN ISO 6270-2:2005, ASTM D2247 and BS 3900 F2, BS 3900 F15 and many others.

Test chamber with the bottom made of steel provides better energy efficiency, easier maintenance and longer life cycle.

  • Cost effective solution for basic water condensation corrosion tests (CH, AT, AHT).
  • Best reproducibility of temperature & climatic conditions with patented Controlled Water Condensation system.
  • User friendly control system with preconfigured test parameters.

Blood Bank Refrigerators

Blood Bank Refrigerators

Refrigerators for the legally safe storage of blood bags / erythrocyte concentrates at +4°C, according to Medical Device 93/42/EEC. The BR range comprises 5 blood refrigerators that are built in compliance with the requirements of DIN 58371 (Germany, "Blutkonserven-Kühlgeräte"/ Blood Refrigerators), ÖNORM K 2030 (Austria, "Blutkonserven-Kühlschränke"/ Blood Refrigerators) and European Medical Device Directive 93/42/EEC.

In conformity with AS 3864 (Australia, Medical refrigeration equipment – for the storage of blood & blood products), BS 4376-1:1991 (UK, Electrically operated blood storage refrigerators. Specifications for closed reaching types) and European Directive, Guide to preparation, use and quality assurance of blood components.

  • According to the European Medical Device Directive 93/42/EEC
  • Natural gas as refrigerant
  • Extremely low energy consumption and noise level
  • DIN 58371 & ÖNORM K 2030 and Clean room classified
     

Advanced Cyclic Corrosion

Advanced Cyclic Corrosion

Compact and highly sophisticated front and top loading Test Chambers for Advanced Cyclic Corrosion Tests including Climate Tests – ClimaCORR®. The chambers are pursuant to the corporate standards of the international automotive industry such as Nissan CCT1 and Renault ECC1.

The VLM ClimaCORR® test chambers regulate both humidity and temperature very accurately. Due to their unique design these chambers can perform any standard corrosion test and can be programmed for any customized test.

All ClimaCORR® test chambers are equipped with the hi-end Beckhoff PLC controller.

  • Salt Spray,  Water Condensation, CWC system from- 40°C  to +80°C
  • Regulated Humidity 10% -98% RH
  • 9 different sensors are monitoring all relevant test parameters

Built-in models

Built-in models

Built-in and sub-assembly laboratory/pharmaceutical refrigerators and deep freezers for preserving temperature-sensitive products.

B Medical Systems offers six models of refrigerators and freezers that can be built in or under laboratory furniture. Dimensions fit perfect for these needs and the cooling/ freezing appliance can be integrated practically and in a space-saving way in your workplace. Thanks to their advantageous dimensions and design the models BR 110 GG, FR 110 GG, LR 110 GG and PR 110 GG are usable both as stand alone versions and built-in/ sub-assembly versions.

  • Natural gas as refrigerant
  • Extremely low energy consumption and noise level
  • DIN 58371 & ÖNORM K 2030 and Clean room classified

Transport boxes

Transport boxes

For the safe transport of blood bags.

The model range MT consists of five passive transport systems supplemented efficiently by a fast freezer for cooling elements and eight active transport boxes, working with Pelletier system or with compressor.

B Medical Systems transport systems are ideal for intensive use with many transport applications, even under difficult climatic conditions. European Agreement on the international transport of hazardous goods by Road (ADR), directive 94/55/EEC. Rail (RID), directive 96/49/EEC. Plane (IATA), directive

  • Please contact us for the big choice of available accessories

Shock Freezers

Shock Freezers

B Medical Systems High Performance Contact Shock Freezers are designed for the fast freezing of blood plasma, biological and pharmaceutical preparations to a core temperature of -30°C.

Horizontal contact shock freezing technology for blood plasma, biological and pharmaceutical preparations. Safety of law and compliance with directives for the preparation of blood plasma storage at a core temperature of < -30°C. Operating temperature: -50°C (preset & recommended) reached within 30 min. Freeze time at core temperature of -30°C for plasma bags of 500 ml (450 ml content): 21 units 40 min. Safety of law and compliance with directives for the preparation of blood plasma storage at a core temperature of < -30°C.

  • Clean room classified
  • Utility model registered DE 203 03 339.5
  • Patent pending PCT/EP2004/001634

Medical Refrigerators

Medical Refrigerators

Refrigerators for the storage of preparations that are subject to cold chain and temperature-sensitive

The product range PR/LR offers volumes from 246 to 746 litres and meets the requirements for a free-standing in clean rooms of GMP class A/ ISO 5 (ISO EN 14644-1). Set point +4°C. The product range MP/ML offers volumes from 153 to 1301 litres and meets the requirements for a free-standing installation in clean rooms of GMP class B/ ISO 6 (ISO EN 14644-1). Set point +5°C. PR/MP models are equipped with glass door, models LR/ML with solid door.

  • Natural gas as refrigerant
  • Extremely low energy consumption and noise level
  • Set point +4°C/+5°C
  • DIN 58345 and GMP Clean room classified

Ultra Deep Freezers

Ultra Deep Freezers

The environmentally friendly UF 755 GG reflects the highest and most uncompromising requirements in the areas state-of-the-art technology and economy. Freezing down to -86°C
  • Natural gas as refrigerant
  • Extremely low energy consumption and noise level
  • Set temperature -20 to  -86°C  
  • Clean room classified

Deep Freezers

Deep Freezers

Up to 738 liter freezer designed for the low-temperature storage of temperature-sensitive products.
  • Set Temperature –20°C to –41°C
  • Clean room classified
  • DIN 58375
  • According to the European Medical Device Directive 93/42/EEC

X-ray fluorescence (XRF)

X-ray fluorescence (XRF)

X-ray fluorescence technology provides one of the simplest, most accurate and most economic analytical methods for the determination of the elemental composition of most types of materials. The technique is generally non-destructive, requiring little if any sample preparation, and is suitable for solids, liquids, powders and alloys.
  • Measure a wide range of elements, from beryllium (5) to uranium (92) with the highest sensitivity.
  • Rigaku provides sub-ppm detection limits for many applications (for example ultra-low sulfur requirements for fuel oils)
  • Rigaku provides the only high powered (200 W) X-ray tube benchtop WDXRF system

X-ray diffraction (XRD)

X-ray diffraction (XRD)

X-ray diffraction (XRD) is one of the most important non-destructive tools to analyze all kinds of matter—ranging from fluids, to powders and crystals. From research to production and engineering, XRD is an indispensable method for materials characterization and quality control. Rigaku has developed a range of diffractometers, in co-operation with academic and industrial users, which provide the most technically advanced, versatile and cost-effective diffraction solutions available today.
  • The most powerful and versatile benchtop diffractometer in the market.Full automated alignment under computer control. High resolution θ/θclosed loop goniometer drive system and cross beam optics (CBO)
  • In-plane scattering arm, and an optional 9.0 kW rotating anode generator.
  • New HiPix 3000 photon counting X-Ray detector

SMX Small molecule X-ray

SMX Small molecule X-ray

Rigaku offers state-of-the-art in a chemical crystallography system with the DECTRIS PILATUS 200K hybrid pixel array detector (HPAD), the very same technology CERN used to detect the putative Higgs boson. XtaLaB P200 is the perfect choice of X-ray diffractometer for both day-to-day routine crystal structure determinations and the more challenging high-resolution electron density studies.
  • Choice of goniometer, 4-circle κ, 4-circle partial-χ, 3-circle fixed-χ
  • Choice of X-ray sources, 3 kW sealed tube, Microfocus seal tube, 1.2 kW microfocus rotating anode, 5.4 kW rotating anode, 2.97 kW microfocus rotating anode
  • Choice of radiation, Molybdenum, Copper

iGC-SEA Surface Energy Analyser

iGC-SEA Surface Energy Analyser

The iGC Surface Energy Analyzer (SEA) continues Surface Measurement Systems' pioneering history with inverse gas chromatography (IGC), which now spans more than fifteen years.

The SEA is a second generation Inverse Gas Chromatograph instrument. The revolutionary SEA is the world's only commercial instrument based on the ICG principle.

The unique SMS injection scheme provides a wide range of injection concentrations with unrivalled accuracy and reproducibility.

  • Fully automated operation
  • Up to 12 different probe gas molecules
  • Wide temperature range

DVS Vacuum

DVS Vacuum

The adsorption of vapors on porous materials is important and vital within numerous industries.

Traditional gravimetric methods are based on using a ‘static' vacuum technique. This method is limited by the fact that ‘out-gassing' of the vacuum chamber contents significantly contributes to the measured pressure and hence to the sorption measurements.

You can now enjoy the capability of obtaining accurate sorption properties of your materials using solvents and gases using our latest DVS Vacuum analyser.

  • Experimental pressures 7×10-6 mbar at 20-70° C.
  • Pre-heat samples up to 400°C under high vacuum.
  • Multi-component experiments with water and organic vapors gases

DVS Intrinsic

DVS Intrinsic

The DVS Intrinsic is the latest dynamic gravimetric water sorption analyser from Surface Measurement Systems.

The Intrinsic was specifically designed to meet the needs of the small to mid-sized laboratories and plants. It combines ease of use with a low capital investment and maintenance burden. The system incorporates the SMS UltrabalanceTM, and industry leading electronics.

The user interface combined with the step-by-step software wizards yield high performance with minimal operator training. .Water vapor only.

  • Experimental temperature 20 – 40° C
  • Small footprint, compact design
  • Up to 5 units from 1 PC via DVS-IntrinsiLinkTM

Coulter Counter, Z-series

Coulter Counter, Z-series

The Z-series COULTER COUNTER use Electrical Sensing Zone Method (Know as the Coulter Principle) for counting cells or particles in the 1-120µm size range.
  • Size range: Overall sizing range from 1 µm to 120 µm
  • Reliability: The Z-series provides absolute cell counts and concentration
  • Golden Standard "Coulter Principle" for measuring cell size and concentration

Automated Tube Handlers

Automated Tube Handlers

BioMicroLab's XL Series of reliable, fliexible and affordable robotic pick and place systems automate crittical sample management tasks such as organizing, reformatting and analyzing samples. 

For labs looking to automate handling 96 well formatted tubes, all four of our XL Series platforms will provide automation for barcode decoding, weighing, and labeling.

  • Automate rack to rack tube transfer 
  • Scan barcode and sort/weigh samples 
  • Easy to integrate

2D Barcode Scanners

2D Barcode Scanners

The BioMicroLab line of Sample Scan full rack and single tube barcode readers are found in drug discovery labs and biorepositories worldwide. Because the SampleScan readers are easy-to-use and integrate well with other systems, they have become a favorite for thousands of users.
  • Scan 2D marked tubes/tube racks
  • Save barcodes to output file
  • Small footprint

Sample Measurement

Sample Measurement

BioMicroLab's Volume Detection offerings include standalone systems for racks and well plates and automated volume detection for tubes and vials. 

he VolumeCheck uses non-contact ultrasonic measurement technology to detect sample volume before or after use on any liquid handling instrument, or tracks and records sample volume your lab receives or dispenses.

  • Non-contact sample volume measurement
  • For well plate & tube rack samples
  • VolumeCheck

Blood Traceability

Blood Traceability


In order to meet management and traceability needs for the transfusion process, Bc Medical Systems distributes the Biolog solution.

Thanks to the electronic label associated with each Blood Bag, the system can remotely optimize stock status, traceability and Blood Bag status in real time. The Blood donation number, product code as well as all important patient information are automatically recorded in the RFID chip's memory.

The B Medical Systems transport container associated with a temperature module allows to guarantee the perfect control of the Blood Cold Chain and its traceability even while transportation.

  • Absolute identification and traceability of RBCC's
  • Optimal management & exhaustive tracking of all transport & storage temperatures
  • Remote querying of relocated stocks
  • Streamlining of distribution and cost reduction

Products

Blood Bank Refrigerators

Built-in models

Deep Freezers

Medical Refrigerators

Shock Freezers

Ultra Deep Freezers

Kontakta oss